Different-colored Anderson SB connectors may not fit because their colors can correspond to different mechanical keys, or because the housings are different sizes. Color alone is not a universal fit rule: black and gray SB 50 housings, and black and blue SB 350 housings, are documented same-size combinations that can mate. Identify both sizes first, then check the color combination for that exact size; do not force or alter keyed housings if they still do not match.
Color can indicate a mechanical key
SB color coding is associated with mechanical keying. The keys are intended to prevent devices with different voltages from being cross-mated. So, when two same-size housings do not mate, their color-associated keying may explain the fit problem.

There are documented exceptions, but they are specific: black and gray SB 50 housings share keying and can mate; black and blue SB 350 housings share keying and can mate. These examples do not establish that other differently colored SB housings fit together. Check the exact size and color combination rather than treating color as a universal rule.
Check the housing size before the color
SB 50 and SB 350 are distinct housing sizes with different physical dimensions. A size mismatch is a separate fit issue from color keying, so a color match alone does not establish that two housings are the same size.
Mechanical fit is only one check in a battery installation. For an example of the other cable, connector, polarity, and system checks, see the golf-cart cable and connector compatibility guide.
- Identify both sizes. Read the SB size or model marking on each housing. If a marking is unclear, compare the housing with the datasheet for the suspected size; color by itself does not identify the size.
- Check the color combination within that size. Use the applicable size-specific information to determine whether that exact pair is documented to share keying. The black/gray exception applies to SB 50; the black/blue exception applies to SB 350.
- Stop if the housings still do not match. Do not force them together or modify the keyed housings. If the sizes and documented color combination do not explain the fit, the available information does not establish the reason; keep the housings unaltered rather than guessing.
FAQs
Does matching color guarantee two Anderson SB housings will mate?
No. Check both housing sizes and the documented color-key combination for that exact size; color alone does not establish fit.
Which differently colored SB pairs are documented as compatible here?
The documented examples are black with gray in SB 50 and black with blue in SB 350. They do not establish compatibility for other sizes or color pairs.
Should I modify the housing keys if two SB connectors do not fit?
No. Do not force or alter keyed housings. Confirm the size and documented color combination, then leave the fit unresolved if those checks do not explain the mismatch.





